-
Mar 19,2024
Static VAR Compensator At the medium voltage level, one common of reactive power compensation is Static Var Compensators (SVCs). SVCs are typically installed in electrical power systems to regulate the voltage and compensate for reactive power fluctuations. They consist of various components such as thyristor-controlled reactors (TCRs) and thyristor-switched capacitors (TSCs) that can quickly adju...
read more
-
Mar 25,2024
Photovoltaic power generation, as a new and pollution-free power generation method today, has greatly alleviated the demand for traditional electric energy. However, for the grid-connected photovoltaic power generation system, due to its inherent randomness, volatility, and intermittent characteristics, and the grid-connected photovoltaic power generation system contains a large number of nonlinea...
read more
-
Mar 25,2024
Static Synchronous Compensator (STATCOM) is a device used in power systems to control voltage and reactive power. In the context of rail transit, STATCOM can serve several purposes: Voltage Regulation: STATCOM can regulate the voltage levels in the rail transit system, ensuring that they remain within acceptable limits. It can compensate for voltage drops or fluctuations caused by various factors ...
read more
-
Apr 25,2024
To connect a Static Synchronous Compensator (STATCOM) to a high voltage system, you need to follow a series of steps and ensure compliance with safety regulations: System Design: Determine the appropriate rating and configuration of the STATCOM based on the requirements of the high voltage system. Consider factors such as voltage level, reactive power compensation, and system stability. Equipment ...
read more
-
May 05,2024
To realize the connection of a Static Synchronous Compensator (STATCOM) to a high voltage system and address negative sequence compensation, you need to follow certain steps: Determine the system requirements: Assess the voltage levels, power ratings, and control requirements of your high voltage system. Understanding the specific needs will help you design and configure the STATCOM accordingly. C...
read more
-
Jun 03,2024
33kV Capacitor Banks Static Reactive Power Compensation: Capacitor banks provide fixed reactive power compensation. Simple Technology: Consists of capacitors connected in series or parallel to provide reactive power. Advantages: Cost-Effective: Typically less expensive than STATCOM, making them a cost-effective solution for reactive power compensation. Simplicity: Easier to install and maintain du...
read more
-
Jul 01,2024
STATCOM (Static Synchronous Compensator) is a power electronic device used power systems for voltage control and power factor correction. While Statcom are not directly related to coal mining operations, they can play a role in providing stable and reliable electrical power for mining operations, including coal mines. Coal mines typically require a significant amount of electrical power for variou...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Jul 16,2024
STATCOM and Voltage Flicker Mitigation What is votlage flicker? Voltage flicker refers to the rapid and repeated fluctuations in the voltage level of a power supply, which can cause noticeable changes in the intensity of lighting and can affect the performance of other electrical equipment. These fluctuations can be annoying and may lead to operational issues in sensitive equipment Causes of Volta...
read more
-
Jul 22,2024
Statcom, Current sampling and voltage sampling Current and Voltage Sampling in STATCOM Static Synchronous Compensator (STATCOM) is a device used for dynamic reactive power compensation and voltage stabilization in power systems. Accurate current and voltage sampling are crucial for the proper functioning of STATCOM, ensuring it provides the necessary reactive power compensation and voltage regulat...
read more
-
Jul 29,2024
The preventive measures for the capacity attenuation of power capacitors are crucial in the application of power capacitor banks. Here are some of the main preventive measures: Control operating conditions: Temperature control: Ensure that the capacitor operates within the temperature range recommended by the manufacturer. Excessive temperature will accelerate the aging of the internal materials o...
read more
-
Aug 09,2024
690V 3 phase 3 wire networks A 690V 3-phase 3-wire network refers to an electrical power distribution system that operates at 690 volts between each line conductor, without a neutral wire. This type of network is commonly used in industrial and commercial applications where the loads do not require a neutral connection or where power is distributed primarily to large motors, equipment, or machiner...
read more
-
Aug 10,2024
Capacitor Banks play an important role in power systems and are mainly used to provide reactive power compensation, improve voltage quality, and improve system stability. Capacitor banks can be divided into many types according to different classification standards. Here are some common capacitor bank types: 1. Classification by connection method Star-connected capacitor bank: The capacitor units ...
read more
-
Aug 19,2024
Response time of reactive power compensation product The response time of a reactive power compensation product refers to the time it takes for the device to detect a change in the reactive power demand and adjust its output accordingly to maintain the desired power factor or voltage level. This is a crucial performance metric for systems that require rapid compensation, such as those with dynamic...
read more
-
Sep 10,2024
What is the relation of Static var generator and Carbon reduction? Static Var Generator (SVG) plays a significant role in reducing carbon emissions by improving the efficiency of electrical systems. Here's how SVGs contribute to carbon reduction: 1. Improved Power Factor SVG help improve the power factor of an electrical system by providing reactive power compensation. A low power factor leads to ...
read more
-
Sep 24,2024
What is the reason of resonance in power networks? Resonance in power networks occurs when the inductive and capacitive elements of the system interact in a way that amplifies specific frequencies, leading to excessive voltage or current oscillations. Here are the primary reasons for resonance in power networks: 1. Impedance Matching Resonant Frequency: Every electrical circuit has a natural reson...
read more
-
Oct 14,2024
Low-voltage capacitor cabinets are electrical equipment used in power systems. Their main function is to compensate the power factor of the power system and improve the power supply quality of the system. When installing low-voltage capacitor cabinets, the following aspects need to be noted: Installation location selection: Low-voltage capacitor cabinets should be installed in ventilated, dry, non...
read more
-
Nov 13,2024
In the power supply system, reactive power compensation can improve the power factor of the power grid, reduce the loss of power transformers and transmission lines, and improve the power supply environment. Reasonable selection of compensation devices can minimize the loss of the power grid and improve the quality of the power grid. If the selection or use is improper, it may cause many problems ...
read more
