-
Feb 26,2024
A Static Synchronous Compensator (STATCOM) is a power electronic device used for voltage control and reactive power compensation in electrical power systems. It is typically connected to the grid and is capable of injecting or absorbing reactive power to regulate the system voltage. The control of voltage by a STATCOM is primarily achieved by manipulating its reactive power output. Here's a basic ...
read more
-
Mar 07,2024
Statcom, short for Static Synchronous Compensator, a device used in power systems to regulate and improve power quality While Statcoms primarily used in electric power transmission and distribution systems, they may also have applications in industrial settings. Statcom,we also call high voltage Static Var Generator SVG In the of a furnace load Statcom can provide benefits, including: 1 Voltage Re...
read more
-
Mar 19,2024
Static VAR Compensator At the medium voltage level, one common of reactive power compensation is Static Var Compensators (SVCs). SVCs are typically installed in electrical power systems to regulate the voltage and compensate for reactive power fluctuations. They consist of various components such as thyristor-controlled reactors (TCRs) and thyristor-switched capacitors (TSCs) that can quickly adju...
read more
-
Mar 25,2024
Photovoltaic power generation, as a new and pollution-free power generation method today, has greatly alleviated the demand for traditional electric energy. However, for the grid-connected photovoltaic power generation system, due to its inherent randomness, volatility, and intermittent characteristics, and the grid-connected photovoltaic power generation system contains a large number of nonlinea...
read more
-
Apr 01,2024
Energy storage has significant potential and offers several opportunities in various sectors. Here are some key chances associated with energy storage: Renewable Energy Integration: Energy storage can facilitate the integration of renewable energy sources like solar and wind power by storing excess electricity generated during periods of high production and supplying it during times of low product...
read more
-
Apr 03,2024
Power factor is an important technical indicator of the power system. It represents the ratio of active power to apparent power in an AC circuit. This ratio is usually expressed as a cosine function (cosφ). The size of the power factor reflects the energy utilization efficiency of the power supply output. If the power factor is too high, that is, the reactive power is too low, it will reduce the r...
read more
-
Apr 17,2024
1. What is reactive power? In the operation of the power grid, due to the existence of current and voltage, there is not only active power but also reactive power in the power system. Active power is the part of electrical energy that is directly converted into efficiency, such as the process in which electrical energy driving motors, heaters and other loads is converted into mechanical energy and...
read more
-
Apr 25,2024
To connect a Static Synchronous Compensator (STATCOM) to a high voltage system, you need to follow a series of steps and ensure compliance with safety regulations: System Design: Determine the appropriate rating and configuration of the STATCOM based on the requirements of the high voltage system. Consider factors such as voltage level, reactive power compensation, and system stability. Equipment ...
read more
-
May 13,2024
The improvement of power quality is mainly through power quality equipment and current signal and other parameters in the current transformer detection system, so as to correctly control the power quality problem in real time and improve the environment of the distribution system. For capacitor bank, we usually only use a CT mounted on the power side for sampling. For SVG / APF, a...
read more
-
May 29,2024
Active filters and passive filters are two types of filters that are often used in electronic circuits. Although they can both be used to filter certain frequencies in electrical signals, there are some different differences between them. 1. Working Principle Passive filters mainly rely on passive components (such as capacitors, inductors, resistors, etc.) to filter signals. They can only process ...
read more
-
May 30,2024
1. What are the 3rd, 5th, and 7th harmonics? In a normal power system, electrical equipment with linear impedance change characteristics will not affect the power supply with a frequency of 50Hz and a standard sinusoidal waveform when it is working. However, with the development of power electronics technology, there are more and more electrical equipment with nonlinear impedance characteristics (...
read more
-
Jun 03,2024
33kV Capacitor Banks Static Reactive Power Compensation: Capacitor banks provide fixed reactive power compensation. Simple Technology: Consists of capacitors connected in series or parallel to provide reactive power. Advantages: Cost-Effective: Typically less expensive than STATCOM, making them a cost-effective solution for reactive power compensation. Simplicity: Easier to install and maintain du...
read more
-
Jul 01,2024
STATCOM (Static Synchronous Compensator) is a power electronic device used power systems for voltage control and power factor correction. While Statcom are not directly related to coal mining operations, they can play a role in providing stable and reliable electrical power for mining operations, including coal mines. Coal mines typically require a significant amount of electrical power for variou...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Jul 16,2024
STATCOM and Voltage Flicker Mitigation What is votlage flicker? Voltage flicker refers to the rapid and repeated fluctuations in the voltage level of a power supply, which can cause noticeable changes in the intensity of lighting and can affect the performance of other electrical equipment. These fluctuations can be annoying and may lead to operational issues in sensitive equipment Causes of Volta...
read more
-
Jul 23,2024
UPS and Energy Storage Technology are two different power systems. Their main differences lie in their working principles, application scenarios, and energy storage methods. The main working principle of UPS is to convert the input AC power into DC power through power conversion circuits and batteries and other devices, and then convert it back to AC output through inverters. When the input power ...
read more
-
Jul 29,2024
The preventive measures for the capacity attenuation of power capacitors are crucial in the application of power capacitor banks. Here are some of the main preventive measures: Control operating conditions: Temperature control: Ensure that the capacitor operates within the temperature range recommended by the manufacturer. Excessive temperature will accelerate the aging of the internal materials o...
read more
-
Aug 09,2024
690V 3 phase 3 wire networks A 690V 3-phase 3-wire network refers to an electrical power distribution system that operates at 690 volts between each line conductor, without a neutral wire. This type of network is commonly used in industrial and commercial applications where the loads do not require a neutral connection or where power is distributed primarily to large motors, equipment, or machiner...
read more
