-
Jan 19,2024
Power Factor Control refers to the management and maintenance of an acceptable power factor in electrical systems. Power factor is the ratio of real power (kW) to apparent power (kVA) in an electrical circuit. A low power factor indicates that the circuit is inefficient and requires more current to deliver a given amount of power. This results in increased energy losses, higher electricity bills, ...
read more
-
Jan 29,2024
To build a capacitor bank panel, you will need to follow these general steps: Determine the capacitor bank size: Calculate the required capacitance based on the power factor correction needs of your system. Consider factors such as the target power factor, load characteristics, and voltage levels. Select capacitors: Choose high-quality capacitors that are suitable for the desired voltage and curre...
read more
-
Feb 26,2024
Why adjust the power factor of a generator? 1. When the generator is running, the power factor is too high, that is, the reactive power is too low, which reduces the reactive power margin of the system and affects the steady-state stability of the generator. Although the economy is improved, in the long run, this is in exchange for an increased probability of accidents. Once an accident occurs, th...
read more
-
Feb 26,2024
A Static Synchronous Compensator (STATCOM) is a power electronic device used for voltage control and reactive power compensation in electrical power systems. It is typically connected to the grid and is capable of injecting or absorbing reactive power to regulate the system voltage. The control of voltage by a STATCOM is primarily achieved by manipulating its reactive power output. Here's a basic ...
read more
-
Mar 07,2024
Statcom, short for Static Synchronous Compensator, a device used in power systems to regulate and improve power quality While Statcoms primarily used in electric power transmission and distribution systems, they may also have applications in industrial settings. Statcom,we also call high voltage Static Var Generator SVG In the of a furnace load Statcom can provide benefits, including: 1 Voltage Re...
read more
-
Mar 07,2024
As a product, electric energy has been widely used at present, and the quality of electric energy is directly related to people's lives and safety. So what is power quality? What does power quality include? 1. What is power quality? Power quality refers to the quality of electric energy in the power system. The ideal electrical energy should be a perfectly symmetrical sine wave. Several factors ca...
read more
-
Mar 20,2024
Urban rail transit systems mainly include: subway systems, light rail systems, monorail systems, trams, maglev systems, automatic guide rail systems, and urban rapid rail systems. According to the different nature of electricity consumption, the power supply system of the subway system is mainly divided into two, one is the traction power supply system and the other is the power lighting power sup...
read more
-
Mar 25,2024
Photovoltaic power generation, as a new and pollution-free power generation method today, has greatly alleviated the demand for traditional electric energy. However, for the grid-connected photovoltaic power generation system, due to its inherent randomness, volatility, and intermittent characteristics, and the grid-connected photovoltaic power generation system contains a large number of nonlinea...
read more
-
Apr 01,2024
Energy storage has significant potential and offers several opportunities in various sectors. Here are some key chances associated with energy storage: Renewable Energy Integration: Energy storage can facilitate the integration of renewable energy sources like solar and wind power by storing excess electricity generated during periods of high production and supplying it during times of low product...
read more
-
Apr 03,2024
Power factor is an important technical indicator of the power system. It represents the ratio of active power to apparent power in an AC circuit. This ratio is usually expressed as a cosine function (cosφ). The size of the power factor reflects the energy utilization efficiency of the power supply output. If the power factor is too high, that is, the reactive power is too low, it will reduce the r...
read more
-
Apr 17,2024
1. What is reactive power? In the operation of the power grid, due to the existence of current and voltage, there is not only active power but also reactive power in the power system. Active power is the part of electrical energy that is directly converted into efficiency, such as the process in which electrical energy driving motors, heaters and other loads is converted into mechanical energy and...
read more
-
Apr 25,2024
To connect a Static Synchronous Compensator (STATCOM) to a high voltage system, you need to follow a series of steps and ensure compliance with safety regulations: System Design: Determine the appropriate rating and configuration of the STATCOM based on the requirements of the high voltage system. Consider factors such as voltage level, reactive power compensation, and system stability. Equipment ...
read more
-
May 06,2024
What is nonlinear load? A nonlinear load is a load whose current is not proportional to its voltage. Since some electronic components, such as transistors and diodes, exhibit nonlinear characteristics when operating, in actual power consumption, some electrical equipment connected to the load will deform the current waveform. This deformation causes the voltage to distort and generate additional f...
read more
-
May 13,2024
The improvement of power quality is mainly through power quality equipment and current signal and other parameters in the current transformer detection system, so as to correctly control the power quality problem in real time and improve the environment of the distribution system. For capacitor bank, we usually only use a CT mounted on the power side for sampling. For SVG / APF, a...
read more
-
May 29,2024
Active filters and passive filters are two types of filters that are often used in electronic circuits. Although they can both be used to filter certain frequencies in electrical signals, there are some different differences between them. 1. Working Principle Passive filters mainly rely on passive components (such as capacitors, inductors, resistors, etc.) to filter signals. They can only process ...
read more
-
Jun 13,2024
When an oscillating system is subjected to periodic external force, the amplitude of the oscillation increases sharply when the frequency of the external force is the same as or very close to the natural oscillation frequency of the system. The frequency at which resonance occurs is called "resonance frequency". In electrical engineering, the resonance phenomenon of an oscillating circuit. The res...
read more
-
Jul 01,2024
STATCOM (Static Synchronous Compensator) is a power electronic device used power systems for voltage control and power factor correction. While Statcom are not directly related to coal mining operations, they can play a role in providing stable and reliable electrical power for mining operations, including coal mines. Coal mines typically require a significant amount of electrical power for variou...
read more
-
Jul 01,2024
First of all, the operation of inductive equipment must establish a magnetic field (such as a motor). Since the instantaneous start-up of large equipment requires the power grid to provide a large amount of Reactive Current to establish a magnetic field, the voltage of the system will be greatly reduced at the moment of equipment startup, causing other equipment to be protected or unable to operat...
read more
