ZDDQ low voltage automatic capacitor banks based on Thyristor(TSC) improves power factor in systems with variable energy demand and non-linear loads, therefore, with variable reactive load needs.
Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equipment and wiring.
Brand:
ZDDQitem no.:
ZD-DWJ-4-X/XPayment:
TT LCproduct origin:
ChinaColor:
RAL7035shipping port:
ShanghaiLead Time:
15 daysOverview
ZDDQ Low Voltage Automatic Capacitor Banks based on Thyristor provide a cost-effective, user friendly, reliable solution for power factor correction. They are a more efficient alternative to individual motor capacitors, especially in large industrial facilities. ZDDQ units are designed to provide power factor correction with a single installation on the main plant bus and are ideal for applications where plant loading is constantly changing, resulting in the need for varying amounts of reactive power. The solid state reactive power controller reacts to a current signal from a single remote current transformer (customer's scope), measures plant power factor and adjusts system load requirements in selected kVAr steps in order to maintain the desired target power factor.
|
|
Metal closed capacitorf banks and harmonic filters | Three phase line diagram of capacitor banks and harmonic filters |
Technical Data
Electrical Specification |
|
Input Voltage Range |
AC 308V-480V |
Electric Connection |
3P4W |
Rated Frequency |
50Hz /60Hz+/- 10% |
Rated Reactive Power Rating Per Cabinet |
100~600kVar |
Operating Mode |
Automatic/ Manual |
Step Composition |
8421 BCD Code Professional Design |
Capacitance tolerance |
-5%~10% |
Rated Insulation Voltage |
690V |
Rated Impulse withstand voltage |
8kv |
Maximum permanent current |
Capacitor:1.8*In at 480V |
Main Incomer protection |
Circuit breaker Protection/Isolated Fuses Group |
Breaking Capacity |
Icu 50kA |
Reactors Rate |
7% |
Control Technology |
|
Human Machine Interface |
ZD-MC Liquid Crystal Display(LCD) Screen |
Control Type |
Rotary handle |
Step protection type |
Over load, over voltage, short circuit, over temperature |
Monitoring |
ZDDQ HMI Monitor Software |
Communication |
RS232/485,USB |
Physical Specification |
|
Color |
RAL 7035(Grey) |
IP Grade of Cabinet |
IP3X |
Cooling method |
Intelligent forced air cooling |
Noise Level |
< 65dB(A) @1m (Module) |
Dimension(W*D*H/mm) |
800*800*2000 or customerized |
Weight(Kg) |
400kg |
Entry |
Bottom or Top |
Environmental Requirement |
|
Mounting location |
Indoor installation |
Ambient Temperature |
-10~50 ℃ |
Relative Humidity |
0~95% |
Altitude |
≤ 2000m Rated Capacity, |
>2000m (derating 1% per 100m) |
General Characteristics
Advantages◆High rupturing capacity (HRC) fuses connected to a busbar system.
◆Contactors/Thyristors specially adapted to the work with capacitors.
◆Inrush current limiting inductances.
◆Fast discharge resistors.
◆Low losses power capacitors.
◆Reactive power controllers.
◆Terminals for neutral and ground conductors.
◆Metal cabinet containing all the switchgear.
◆Equipments wired and tested at works, full finished and supplied with all control and safety devices.
◆Easy transportation and installation due to their light weigh.
◆Easy selection of the most appropriate cos φ to avoid penalty charges on tariffs.
◆Long life and high reliability, thank to the use of self-healing and low losses capacitors.
◆Wide range of power (from 10 to 1600 kvar) with standard equipments for immediate delivery.
◆Option of including various accessories.
Applicaitons
ZDDQ Capacitor banks and harmonic filters are widely used for fluctuating loads such as motors, variable frequency drives, melting furnace from Steel Rolling mills,Chemical industry,Cement plant, Suger plant, Textile, Hospitals, Hotels, Building segment,Automobile industry,Oil and gas industry,public grid etc.
Scan to WhatsApp: