-
Dec 09,2023
The low-voltage automatic compensation capacitor cabinet produced and developed by ZD DQhas been successfully installed at the customer's site. The customer's problem of low power factor was successfully solved, and the power factor reached 0.95 after compensation. Thanks again to our customers for their trust and support.
read more
-
Jan 19,2024
Power Factor Control refers to the management and maintenance of an acceptable power factor in electrical systems. Power factor is the ratio of real power (kW) to apparent power (kVA) in an electrical circuit. A low power factor indicates that the circuit is inefficient and requires more current to deliver a given amount of power. This results in increased energy losses, higher electricity bills, ...
read more
-
Jan 29,2024
To build a capacitor bank panel, you will need to follow these general steps: Determine the capacitor bank size: Calculate the required capacitance based on the power factor correction needs of your system. Consider factors such as the target power factor, load characteristics, and voltage levels. Select capacitors: Choose high-quality capacitors that are suitable for the desired voltage and curre...
read more
-
Feb 26,2024
A Static Synchronous Compensator (STATCOM) is a power electronic device used for voltage control and reactive power compensation in electrical power systems. It is typically connected to the grid and is capable of injecting or absorbing reactive power to regulate the system voltage. The control of voltage by a STATCOM is primarily achieved by manipulating its reactive power output. Here's a basic ...
read more
-
Mar 07,2024
Statcom, short for Static Synchronous Compensator, a device used in power systems to regulate and improve power quality While Statcoms primarily used in electric power transmission and distribution systems, they may also have applications in industrial settings. Statcom,we also call high voltage Static Var Generator SVG In the of a furnace load Statcom can provide benefits, including: 1 Voltage Re...
read more
-
Mar 25,2024
Photovoltaic power generation, as a new and pollution-free power generation method today, has greatly alleviated the demand for traditional electric energy. However, for the grid-connected photovoltaic power generation system, due to its inherent randomness, volatility, and intermittent characteristics, and the grid-connected photovoltaic power generation system contains a large number of nonlinea...
read more
-
Mar 25,2024
Static Synchronous Compensator (STATCOM) is a device used in power systems to control voltage and reactive power. In the context of rail transit, STATCOM can serve several purposes: Voltage Regulation: STATCOM can regulate the voltage levels in the rail transit system, ensuring that they remain within acceptable limits. It can compensate for voltage drops or fluctuations caused by various factors ...
read more
-
May 05,2024
To realize the connection of a Static Synchronous Compensator (STATCOM) to a high voltage system and address negative sequence compensation, you need to follow certain steps: Determine the system requirements: Assess the voltage levels, power ratings, and control requirements of your high voltage system. Understanding the specific needs will help you design and configure the STATCOM accordingly. C...
read more
-
May 13,2024
The improvement of power quality is mainly through power quality equipment and current signal and other parameters in the current transformer detection system, so as to correctly control the power quality problem in real time and improve the environment of the distribution system. For capacitor bank, we usually only use a CT mounted on the power side for sampling. For SVG / APF, a...
read more
-
Jun 03,2024
33kV Capacitor Banks Static Reactive Power Compensation: Capacitor banks provide fixed reactive power compensation. Simple Technology: Consists of capacitors connected in series or parallel to provide reactive power. Advantages: Cost-Effective: Typically less expensive than STATCOM, making them a cost-effective solution for reactive power compensation. Simplicity: Easier to install and maintain du...
read more
-
Jul 01,2024
First of all, the operation of inductive equipment must establish a magnetic field (such as a motor). Since the instantaneous start-up of large equipment requires the power grid to provide a large amount of Reactive Current to establish a magnetic field, the voltage of the system will be greatly reduced at the moment of equipment startup, causing other equipment to be protected or unable to operat...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Jul 22,2024
Statcom, Current sampling and voltage sampling Current and Voltage Sampling in STATCOM Static Synchronous Compensator (STATCOM) is a device used for dynamic reactive power compensation and voltage stabilization in power systems. Accurate current and voltage sampling are crucial for the proper functioning of STATCOM, ensuring it provides the necessary reactive power compensation and voltage regulat...
read more
-
Sep 10,2024
What is the relation of Static var generator and Carbon reduction? Static Var Generator (SVG) plays a significant role in reducing carbon emissions by improving the efficiency of electrical systems. Here's how SVGs contribute to carbon reduction: 1. Improved Power Factor SVG help improve the power factor of an electrical system by providing reactive power compensation. A low power factor leads to ...
read more
-
Sep 24,2024
What is the reason of resonance in power networks? Resonance in power networks occurs when the inductive and capacitive elements of the system interact in a way that amplifies specific frequencies, leading to excessive voltage or current oscillations. Here are the primary reasons for resonance in power networks: 1. Impedance Matching Resonant Frequency: Every electrical circuit has a natural reson...
read more
-
Oct 14,2024
Low-voltage capacitor cabinets are electrical equipment used in power systems. Their main function is to compensate the power factor of the power system and improve the power supply quality of the system. When installing low-voltage capacitor cabinets, the following aspects need to be noted: Installation location selection: Low-voltage capacitor cabinets should be installed in ventilated, dry, non...
read more
