-
Jun 07,2021
Energy consumption pattern The energy pattern given in below table is helpful in understanding the way energy is used in a foundry and helps to control energy cost by identifying areas where waste can occur and where scope for improvement may be possible. It is observed that melting consumes a major portion of total energy consumed. SN Sections Energy Consumption 1 Melting(Furnance) 70% 2 Molding ...
read more
-
Jun 24,2021
As an inexpensive source of reactive power, capacitor banks bring many benefits to a facility. They are widely deployed to avoid penalties on utility bills, lower distribution losses, increase transformer/Genset capacity, maintain nominal voltage, and to reduce energy losses resulting in decreased carbon emissions. When coupled with reactors, capacitor banks can filter harmonics generated by...
read more
-
Aug 24,2021
Why does the power factor need to be corrected at MV? Reactive power compensation is essential for the correct technical and economical management of an MV Networks. Its benefits are: Economic benefits — Reduced billable reactive energy costs (surcharges by country and tariff) — Reduced hidden economic cost from the Joule effect in transport lines — Enables a better use ratio (kW/kVA) for installa...
read more
-
Sep 13,2021
Benefits by installing power factor correction systems? Power factor correction systems provide much benefit: Reduced electricity utility bills Your electric utility provides working (kW) and reactive power (kVAR) to your plant in the form of apparent power (kVA). While reactive power (kVAR) doesn’t register on kW demand or kW hour meters, the utility’s transmission and distribution system must be...
read more
-
Oct 09,2021
Power capacitors are very beneficial in power networks. They provide reactive power required by motors, transformers, etc. This increases the transmission capacity and reduces losses thanks to higher power factors. They enable the power factor targets of the utilities to be met. Power capacitors and series reactors are also a key component in various filter solutions that reduce harmonic cont...
read more
-
Oct 15,2021
Overview Rapid growth of inductive electric loads on utility networks has impacted the efficient operation of AC electrical transmission and distribution grid by increasing the need for reactive power (VAr/kVAr/MVAr) that are required to be supplied with active power. Install capacitor banks to reduce the reactive power demand from point of generation to point of use in high voltage networks. Brin...
read more
-
Nov 13,2021
ZDDQ products offer a power quality solution, which allows users to select features to meet their applications needs. The capacitor bank offers customers system benefits such as: • Improved Power Factor • System capacity release • Reduced losses • Improved power flow • Cost savings Capacitors are needed in the different parts of the network as part of reactive power compensation and...
read more
-
Jan 15,2022
ZDDQ carefully understood the spirit of the document, and organized employees to focus on watching the TV feature film "Life is more important than Mount Tai—Learning General Secretary Xi Jinping's important exposition on safe production", so as to achieve full coverage of learning and attach great importance to this work.
read more
-
Jan 20,2022
Static Synchronous compensator (STATCOM) is a fast-acting device capable of providing or absorbing reactive current and thereby regulating the voltage at the point of connection to a power grid. It is categorised under Flexible AC transmission system (FACTS) devices. The technology is based on VSCs with semi-conductor valves in a modular two-level configuration. ZDDQ Statcom have installed in many...
read more
-
Mar 12,2022
ZD-HVSVG series HV static var generator/SVG/STATCOM using IGBT as the core power modules which can quickly and continuously provide capacitive or inductive reactive power, achieve constant reactive power, constant voltage and constant power factor control through the assessment point, and ensure the power grid is running stable, high efficiency and high quality. In the power distribution...
read more
-
Mar 27,2022
SVC: A static VAR compensator (SVC) is a set of electrical devices for providing fast-acting reactive power on high-voltage electricity transmission networks. Statcom: A Stati synchronous COMpensator (STATCOM) is a fast-acting device capable of providing or absorbing reactive current and thereby regulating the voltage at the point of connection to a power grid. Advantages of SVC SVCcontrol vo...
read more
-
Apr 25,2022
Statcom in Solar Shanxi Taigu County Wind and Wind Power Generation Co., Ltd. 20MW agricultural and photovoltaic complementary power generation project is located in Donghuaiyuan Village, Shuixiu Township, Taigu County, Jinzhong City, Shanxi Province. The total installed capacity of the project is 20MW Solar. The project covers an area of more than 466,000m2. Based on the principle of focusing on ...
read more
-
May 27,2022
ZDDQ low voltage automatic capacitor banks improves power factor in networks with variable energy demand and non-linear loads, therefore, with variable reactive load needs. Equipped with a power factor controller to regulate their automated operation and monitoring features, ZDDQ automatic capacitor banks remove power factor charges of the electricity bill and reduce the losses of electrical equip...
read more
-
Jun 30,2022
The benefits of power factor correction 1.Savings on the electricity bill Power factor correction eliminates penalties on reactive energy, decreases demand on kVA, and reduces power losses generated in the transformers and conductors of the installation. 2.Increased available power Fitting PFC equipment on the low voltage side increases the power available at the secondary of a MV/LV transformer. ...
read more
-
Jul 05,2022
Step–less reactive compensator –STATCOM Static Synchronous Compensator (STATCOM) hasearned its name as it does not have any rotating or moving parts, and yet offers a fast and step-less reactive compensation. It is based on voltage source converter (VSC) technology, which uses low-voltagecells in series to realise a high voltage output By controlling the output voltage to be either higher or lower...
read more
-
Aug 03,2022
Energy demand is anticipated to be double by 2030. CO2 emissions should be halved to avoid global warming acceleration. Both issues place a major challenge on the generating capacity of all utilities, and on us as electricity end users. Energy efficiency becomes more than a cost issue today. It becomes part of the journey to ensure energy availability and preserve the environment in the future. Ma...
read more
-
Aug 22,2022
The application of distribution system capacitor banks has long been accepted as a necessary step in the design of distribution feeders. Design considerations often include traditional factors such as voltage support, power factor, and released capacity. However, as customer systems evolve through the use of power electronics, the distribution system design of the future will include power quality...
read more
-
Sep 08,2022
ZDDQ Low Voltage Capacitor Banks provide a cost-effective, user friendly, reliable solution for power factor correction. They are a more efficient alternative to individual motor capacitors, especially in large industrial facilities. ZDDQ Power Factor Correction Panels are designed to provide power factor correction with a single installation on the main plant bus and are ideal for applications wh...
read more
