-
Jan 29,2024
To build a capacitor bank panel, you will need to follow these general steps: Determine the capacitor bank size: Calculate the required capacitance based on the power factor correction needs of your system. Consider factors such as the target power factor, load characteristics, and voltage levels. Select capacitors: Choose high-quality capacitors that are suitable for the desired voltage and curre...
read more
-
Feb 19,2024
What is harmonics issues in AC and DC grid? In AC and DC grids, harmonics refer to the presence of frequency components that are integer multiples of the fundamental frequency. Harmonics can be problematic because they can cause various issues such as: Voltage and Current Distortion: Harmonics in the grid can distort the shape of the voltage and current waveforms, resulting in distorted sine waves...
read more
-
Feb 26,2024
A Static Synchronous Compensator (STATCOM) is a power electronic device used for voltage control and reactive power compensation in electrical power systems. It is typically connected to the grid and is capable of injecting or absorbing reactive power to regulate the system voltage. The control of voltage by a STATCOM is primarily achieved by manipulating its reactive power output. Here's a basic ...
read more
-
Mar 20,2024
Urban rail transit systems mainly include: subway systems, light rail systems, monorail systems, trams, maglev systems, automatic guide rail systems, and urban rapid rail systems. According to the different nature of electricity consumption, the power supply system of the subway system is mainly divided into two, one is the traction power supply system and the other is the power lighting power sup...
read more
-
Apr 17,2024
1. What is reactive power? In the operation of the power grid, due to the existence of current and voltage, there is not only active power but also reactive power in the power system. Active power is the part of electrical energy that is directly converted into efficiency, such as the process in which electrical energy driving motors, heaters and other loads is converted into mechanical energy and...
read more
-
May 06,2024
What is nonlinear load? A nonlinear load is a load whose current is not proportional to its voltage. Since some electronic components, such as transistors and diodes, exhibit nonlinear characteristics when operating, in actual power consumption, some electrical equipment connected to the load will deform the current waveform. This deformation causes the voltage to distort and generate additional f...
read more
-
May 29,2024
Active filters and passive filters are two types of filters that are often used in electronic circuits. Although they can both be used to filter certain frequencies in electrical signals, there are some different differences between them. 1. Working Principle Passive filters mainly rely on passive components (such as capacitors, inductors, resistors, etc.) to filter signals. They can only process ...
read more
-
Jun 13,2024
When an oscillating system is subjected to periodic external force, the amplitude of the oscillation increases sharply when the frequency of the external force is the same as or very close to the natural oscillation frequency of the system. The frequency at which resonance occurs is called "resonance frequency". In electrical engineering, the resonance phenomenon of an oscillating circuit. The res...
read more
-
Jul 01,2024
First of all, the operation of inductive equipment must establish a magnetic field (such as a motor). Since the instantaneous start-up of large equipment requires the power grid to provide a large amount of Reactive Current to establish a magnetic field, the voltage of the system will be greatly reduced at the moment of equipment startup, causing other equipment to be protected or unable to operat...
read more
-
Jul 09,2024
In the power system, the on-site compensation of high-voltage motors should be invested when the voltage drops by more than 10%. 1. The role of on-site compensation of high-voltage motors The on-site compensation of high-voltage motors can effectively improve the power factor of the power system, reduce line losses, ensure the stable operation of the system voltage, and reduce energy consumption a...
read more
-
Jul 16,2024
STATCOM and Voltage Flicker Mitigation What is votlage flicker? Voltage flicker refers to the rapid and repeated fluctuations in the voltage level of a power supply, which can cause noticeable changes in the intensity of lighting and can affect the performance of other electrical equipment. These fluctuations can be annoying and may lead to operational issues in sensitive equipment Causes of Volta...
read more
-
Aug 09,2024
690V 3 phase 3 wire networks A 690V 3-phase 3-wire network refers to an electrical power distribution system that operates at 690 volts between each line conductor, without a neutral wire. This type of network is commonly used in industrial and commercial applications where the loads do not require a neutral connection or where power is distributed primarily to large motors, equipment, or machiner...
read more
-
Aug 28,2024
Medium voltage power factor correction Medium Voltage Power Factor Correction (MV PFC) involves the application of devices and systems designed to improve the power factor in medium voltage electrical networks, typically in the range of 1 kV to 35 kV. Power factor correction at medium voltage is crucial for enhancing the efficiency of electrical power distribution, reducing losses, and avoiding pe...
read more
-
Sep 02,2024
Dynamic reactive power compensation Dynamic Reactive Compensation refers to the real-time adjustment of reactive power in an electrical system to maintain optimal voltage levels, improve power factor, and enhance overall power quality. It is essential in modern power systems, particularly in environments where loads fluctuate rapidly or where maintaining a stable voltage is critical. 1. Understand...
read more
-
Sep 05,2024
Application of reactive power compensation device SVG: Power system: SVG can be used for reactive power compensation and voltage regulation of power system to improve the stability and reliability of power grid. It can help power system reduce power loss, improve voltage quality, and improve power factor and efficiency of power grid. Industrial field: SVG can be used for reactive power compensatio...
read more
-
Sep 11,2024
Selecting the capacity of the transformer is crucial, as it directly affects the stability, efficiency and safety of the power system. The appropriate transformer capacity can ensure that current and future load requirements are met, avoiding equipment damage and energy waste caused by overload or underload. The correct capacity selection helps optimize operating costs, extend equipment life, and ...
read more
-
Sep 24,2024
What is the reason of resonance in power networks? Resonance in power networks occurs when the inductive and capacitive elements of the system interact in a way that amplifies specific frequencies, leading to excessive voltage or current oscillations. Here are the primary reasons for resonance in power networks: 1. Impedance Matching Resonant Frequency: Every electrical circuit has a natural reson...
read more
-
Sep 30,2024
Notice All departments of the ZDDQ: In light of the actual situation of the company, arrangements are now made for the National Day holiday in 2024, as follows： Take a 7-day holiday from October 1 to October 7. Work as usual on October 8. Pay attention to safety during the holidays, and wish you all a happy holiday.
read more
