ZDDQ power quality correction products are part of the solution. Most utilities charge for peak electrical demand on each month’s electrical bill. The demand charge is to allow the utilities to recoup part of their capital investment in the distribution network they operate. Each customer pays a demand charge for its peak operating load. Often inherent in the structure of these demand charges is a...

Part 1:Principle of reactive energy management All AC electrical networks consume two types of power: active power (kW) and reactive power (kVAr): The active power P (in kW) is the real power transmitted to loads such as motors,lamps, heaters, computers, etc. The electrical active power is transformed into mechanical power, heat or light. The reactive power Q (in kVAr) is used only to power the ma...

WHAT IS HARMONIC FILTERING? To understand the purpose of harmonic filtering, it helps to understand what harmonics are. The voltage of a standard 50Hz Alternating Current(AC) power supply swings between positive and negative 50 times a second, following a neat sine-wave. Linear AC electrical loads such as heaters or incandescent lights draw a current that follows this same sine-wave. The graph abo...

How much can be saved? Ultimately the level of energy saving achieved will be dictated by a combination of the incoming supply voltage level and the types of electrical equipment in use. The higher the supply voltage, the greater the potential to make energy savings. However different types of electrical equipment deliver different levels of energy saving for the same reduction in voltage. Voltage...

The rising power consumption for the power quality equipment is the key driving factor for the market growth ZDDQ found according to the report: The global power quality equipment market size is projected to reach nearly USD 33.7 billion by 2028. Additionally, the market is forecasted to grow a CAGR of above 6.5% over the forecast period of 2020-2028. The key motivating force for the power efficie...

Status analysis According to marketing research by ZDDQ(ANHUI ZHONGDIAN ELECTRC CO., LTD.). To reduce energy consumption and increase energy efficiency, many facility management executives are looking to renewable energy sources, such as solar or wind, to offset reliance on traditional electric power. Despite the growing prevalence of these solutions, there are drawbacks that can make alternative ...

Upgrading Older Capacitor Banks is Important As an inexpensive source of reactive power, capacitor banks bring many benefits to a facility.  They are widely deployed to avoid penalties on utility bills, lower distribution losses, increase transformer/Genset capacity, maintain nominal voltage, and to reduce energy losses resulting in decreased carbon emissions. When coupled with reactors, capa...

Energy consumption pattern The energy pattern given in below table is helpful in understanding the way energy is used in a foundry and helps to control energy cost by identifying areas where waste can occur and where scope for improvement may be possible. It is observed that melting consumes a major portion of total energy consumed. SN Sections Energy Consumption 1 Melting(Furnance) 70% 2 Molding ...

The ZDDQ SVG module we exported to Colombia in mid-September has been put into use and installed in an airport power distribution room somewhere in Bogota, and the compensation effect is good. The two modules are: 440V 60Hz 40kvar(50A) SVG Module and 440V 60Hz 80kvar(100A) SVG Module.

ZDDQ Active Power Filter Exported to Lebanon. We are ZDDQ, which is a professional designer and top manufacturer of power quality field. And we focus on power quality improvement and power factor correction since 2001. In recent years, our business sector in the Middle East has gradually expanded, and more and more customers choose to use ZDDQ products. The following is a 100A active harmonic filt...

Thanks to the customer's trust, we completed the production and delivery of 300kvar SVG in 10 days. The customer also successfully completed the installation. ZDDQ Power Quality Products ZD-APF Active Harmonic Filter ZD-SVG Static Var Generator ZD-DWT Thyristor Switched Capacitor Banks ZD-FGSVG MV Statcom ZD-GWJ  MV Capacitor Banks

ZDDQ STATCOM FACTORY First-class production technology and the spirit of continuous innovation allow us to proudly display factory. European customers are welcome to visit our factory, see our manufacturing process with their own eyes, and experience this amazing field with us. Built with care and pursuing excellence, our factory welcomes you at any time!

ZDDQ, a professional manufacturer of power factor correction and harmonic mitigation field since 2001. Today let's talk about power factor correction and energy saving. Power factor correction (PFC) is a technique used to improve the power factor of electrical systems. The power factor is a measure of how effectively the current is being converted into useful work in an AC electrical system. A low...

ZDDQ is committed to the power quality industry, keeping up with the development of the field, and is now cooperating with FGI on the energy storage industry (ESS). An energy storage system (ESS) is a technology that stores excess electrical energy and releases it when needed. It helps to enhance the reliability, stability, and efficiency of electrical power systems by addressing the intermittency...

Energy storage has significant potential and offers several opportunities in various sectors. Here are some key chances associated with energy storage: Renewable Energy Integration: Energy storage can facilitate the integration of renewable energy sources like solar and wind power by storing excess electricity generated during periods of high production and supplying it during times of low product...

UPS and Energy Storage Technology are two different power systems. Their main differences lie in their working principles, application scenarios, and energy storage methods. The main working principle of UPS is to convert the input AC power into DC power through power conversion circuits and batteries and other devices, and then convert it back to AC output through inverters. When the input power ...